Pinnacle Systems SLT Series - Manual (Page 24)

17
SLT Series
Diagnostics and Troubleshooting
Diagnostic Display decimal points
light up when the
Auto Blank (optional feature) keyswitch is moved from
the OFF/RESET position into an Auto Blank mode
position. This is to show the user how many beams the
Auto Blank obstruction is blocking. This display will last
for about two seconds while the computer ’s are
programming in the obstruction.
Display Definition
.0. No beams blocked
.1. 1 beam blocked
.2. 2 beams blocked
.3. 3 beams blocked
.4. 4 beams blocked
.5. 5 beams blocked
.6. 6 beams blocked
.7. 7 beams blocked
.8. 8 beams blocked
The following display codes exceed the maximum
allowed blocked beams for Auto Blank.
.9. 9 BEAMS BLOCKED
.A. 10 BEAMS BLOCKED
.B. 11 BEAMS BLOCKED
.C. 12 BEAMS BLOCKED
.D. 13 BEAMS BLOCKED
.E. 14 BEAMS BLOCKED
.F. 15 OR MORE BEAMS BLOCKED
16