Lens osd – TEKVOX 380-HD Camera User Manual
Page 10
LENS OSD
Press “LENS OSD” button on remote controller to display and make changes to the camera’s Lens and its
image quality. When changes are made to these settings, their values
are stored in the camera’s
nonvolatile memory.
ISS (Image Stable Mode) Default value: NO
o
SUPPORT/NO Support option
ISE (Image Stable Mode) Default value: OFF
o
ISE: ON/OFF
BLC (Back light comp) Default value: OFF
o
BLC: ON/OFF
SELECT SCENE Default value: INACTIVE
o
Select scene: ACTIVE/INACTIVE
SELECT SCENE Default value: NIGHT
o
Under Active situation: AUTO/WDR/HIGH/NIGHT option
METERING LIGHT MODE Default value: WDR
o
Optional Mode: CENTER/SPOT/WDR
EXPOSE MODE Default value: PAE
o
Mode option: MANUAL/PAE/AAE/SAE
APERTURE MODE Default value:F1.8
o
Aperture range: F1.8
—F11
SHUTTER SPEED Default value:1/5
o
Shutter speed range: 1/5
—1/4000
EV CORRECTION Default value:+0
o
Option value: -2/-1.66/-1.33/-1/-0.66/-0.33/0/ +0.33/+0.66/+1/ +1.33/+1.66/+2
ISO SENSITIVITY Default value: AUTO
o
Option value: AUTO / MANUAL
MANUAL SETUP Default value:IS080
o
Under manual ISO sensitivity, the parameter could be set to:
ISO80/ISO100/ISO200/ISO400/ISO800 /ISO1000
FLICKER REDUCTION Default value: ON
o
Option: ON / OFF
WHITE BALANCE Default value: AUTO
o
Option value: AUTO/CUSTOM/MANUAL/DAYLIGHT
/CLOUDY/SHADE/FLW/FLN/FLD/TUNGSTEN
DIGITAL EFFECT Default value: NORMAL
o
Value option: NORMAL/SEPIA/MONOCHROM/ POSTERIZE/SOLARIZE/NEGA
SHARPNESS REDUCTION Default value: MIDDLE
o
Setting option: HIGH/MIDDLE/LOW
NOISE REDUCTION Default value: MIDDLE
o
Setting option: HIGH/MIDDLE/LOW/OFF
CHROMA KEY CR Default value: LOW
o
Setting option: HIGH/MIDDLE/LOW
CHROMA KEY CB Default value: LOW
o
Setting option: HIGH/MIDDLE/LOW
AUTO SLOW SHUTRER Default value: OFF
o
In the situation of the light is dark to increase lighting volume.