Osd menu, Self-testing osd menu, Dome osd – TEKVOX 380-HD Camera User Manual
Page 9: Self-testing osd menu dome osd
TEK 380-HD Conference Camera
8
TEKVOX, Inc.
–512.808.0845
Austin, TX 78746
OSD Menu
Access OSD menu to view the features of camera and change the settings. Note: Camera cannot move
pan/tilt when OSD menu is displayed.
Self-testing OSD Menu
When the camera is powered on, it performs a self-test and displays an OSD menu as follows:
ADDRESS Camera address
BUADRATE Camera baud rate
PROTOCOL PTZ Control Protocol
CONTROL Camera control type
LENSTYPE Camera module adopted
DOMETYPE Camera model No.
VENDER Manufacturer name
VERSION
Factory version N
Dome OSD
Press the
“DOME OSD” button on remote controller to display and make changes to the camera’s Pan and
Tilt functions and its operation. When changes are made to these settings, their values are stored in the
camer
a’s nonvolatile memory.
These setting include:
PAN SPEED Default value: 30
o
Adjustable pan movement speed scope 1~63
TILT SPEED Default value: 30
o
Adjustable tile movement speed scope 1~63
SCAN SPEED Default value: 6
o
Adjustable pan movement speed scope 1~63
TOUR PATH Default value: 1
o
Optional tour path at 1~4
TOUR DWELL(Tour duration time) Default value: 5
o
Tour duration is 1~60 seconds
PROPORTION (Speed matching) Default value: ON
o
ON enable speed match function
AUTO REV Default value: P
o
(P) Image auto flip (positive) / (N) upside down/OFF
FRAME FORMAT Default value: 1080i/60
o
Other Settings - 1080p/30, 1080p/25, 1080p/24, 1080i/60, 1080i/50, 720p/60, 720p/50
OUTPUT TYPE Default value: DVI
o
Other settings - HDMI / DVI
ASPECT RATIO (display mode) Default value: 16:9
o
Other settings - 16:9/4:3