Thor HD Video Encoder & DVB-S2 Modulator - Manual (Page 11)

THOR H-1SDI-DVB-S2
~ 8 ~
Chapter 3 Operation
The front panel of the H-1SDI-DVBS2 has an easy interface for manual
operation of the unit. For easier and more manageable access please connect
an RJ45 ethernet cable to the data port in the back to allow for the unit to be
accessed by IP using the built in NMS GUI.
Keyboard Function Description:
MENU: Cancel current entered value, resume previous setting; Return to
previous menu.
ENTER: Activate the parameters which need modification, or confirm the
change after modification.
LEFT/RIGHT: Choose and set the parameters.
UP/DOWN: Modify activated parameter or paging up/down when parameter
is inactivated.
LOCK: Locking the screen / canceling the lock state. After pressing lock key,
the system will question the you to save present setting or not. If not, the LCD
will display the current configuration state.
3.1 Main Interface
Switch on the encoder modulator, the LCD will display the start state and the
main menu as below:
Start up………………………….