WaveWare API-64 Alarm Monitoring - Manual (Page 13)

6. Momentarily power down the API-64RM and then power it back up.
7. Press the <ENTER> key within 5 seconds of powering the unit back up.
8. "Dial no:" should appear on the screen of the computer that you are using. Enter the paging terminal
telephone number that you obtained from the paging supplier or system manager <NUMBER> keys.
Remember to include the area code if required. Include any other digits, or pauses required in the dial string
to obtain an outside line if required. Press <ENTER>
9. " Password:" will appear. If the paging company or system uses a password, enter the number that was
supplied to you. If the paging company or system does not use passwords (most do not) leave this field
blank and press the <Enter>key. Type <CTRL> <N> to exit the programming. Connect the API-64RM to
the API-64 using the cable supplied as shown in the connection diagram on page 3-2.
***********For API-64RM leave all other fields blank in the programming menu***************
WARNING: CONNECTING A TELEPHONE LINE TO THE PROGRAMMING/RS232 PORT ON THE
API-64RM WILL CAUSE DAMAGE TO THE UNIT. REFER TO THE CONNECTION DIAGRAM ON
PAGE 3-2 OF THIS MANUAL.