Zektor Palladia™ 8X8 - Manual (Page 51)

HDA800(V2) Serial Protocol, Version 1.3, 9/12/13 51
Advanced Control
n = Number of keys available in source. 0 = Key limits are not checked, 1-23 = Limit the num-
ber of HDCP keys to ‘n’.
This setting is lost when power is cycled on the HDA800(V2). To save this settings through a power
cycle, backup the HDMI settings using the ‘SS’ command. (See “‘SS’ Save Default Power On Set-
tings” on page 43.)