ARRIS TM722G-CT User Guide - Manual (Page 28)

Installing USB Drivers on Windows 2000
Follow these steps to install USB drivers on Windows 2000.
1 Make sure the Telephony Modem is on (the Power light should be on). If
not, connect the AC adapter as described in Connecting the Telephony
Modem .
WARNING
Potential equipment damage
Do not use a mini CD in a slot-loading drive without using a mini CD
adapter. Damage to the drive may result. A mini CD can be used in most
tray-loading drives without an adapter.
2 Insert the mini CD that came with the Telephony Modem package into the
CD-ROM drive.
3 Plug the appropriate end of the USB cable into the Telephony Modem and the
other end into the computer’s USB port.
The following window appears, indicating that the PC has detected a new
USB device:
Touchstone TM722 Telephony Modem User’s Guide
Safety
Getting
Started
Battery
Installation Installation
USB
Drivers
Ethernet
Configuration Usage Troubleshooting Glossary
28