6 security, 7 save & exit, 6 security 4.5.7 save & exit – Artesyn ATCA-7365-CE Installation and Use (May 2014) User Manual
Page 116: Table 4-27, Save & exit, Bios
![background image](/files/772445/content/doc116.png)
BIOS
ATCA-7365-CE Installation and Use (6806800L73J)
116
4.5.6
Security
If ONLY the Administrator's password is set, then this only limits access to Setup and is only
asked for when entering Setup If ONLY the User's password is set, then this is a power on
password and must be entered to boot or enter Setup. In Setup the User will have Administrator
rights.
4.5.7
Save & Exit
ARTM FC Boot
Enabled,
Disabled (Default)
Controls execution of the Option ROM for RTM Firbre
Channel controller. Select Enabled when RTM Fibre
Channel Boot is required.
Table 4-26 Boot -> Option ROM Execution (continued)
Item
Values
Description
Table 4-27 Save & Exit
Item
Values
Description
Save Changes and Exit
Exit BIOS setup after saving the changes.
Discard Changes and Exit
Exit BIOS setup without saving any changes.
Save Changes and Reset
Reset the system after saving the changes.
Discard Changes and Reset
Reset system setup without saving any changes.
Save Changes
Save Changes done so far to any of the setup
options.
Discard Changes
Discard Changes done so far to any of the setup
options.
Restore Defaults
Restore/Load Defaults values for all the setup
options.
Boot Override
Select a Boot Device to boot one time. Boot order is
not changed.