Artesyn ATCA-7365-CE Installation and Use (May 2014) - Manual (Page 136)

BIOS
ATCA-7365-CE Installation and Use (6806800L73J) 136
4.13.1 Status Code Ranges
4.13.2 Standard Status Codes
Table 4-52 Status Code Ranges
Status Code Range Description
0x01 – 0x0F SEC Status Codes & Errors
0x10 – 0x2F PEI execution up to and including memory detection
0x30 – 0x4F PEI execution after memory detection
0x50 – 0x5F PEI errors
0x60 – 0xCF DXE execution up to BDS
0xD0 – 0xDF DXE errors
0xE0 – 0xE8 S3 Resume (PEI)
0xE9 – 0xEF S3 Resume errors (PEI)
0xE8 - 0xEF Memory initialization errors
0xB0 - 0xBF Additional Memory Initialization Status Codes
0xE8 - 0xEE Additional Memory Error Status Codes
Table 4-53 SEC Status Codes
Status Code Description
0x0 Not used
Progress Codes
0x1 Power on. Reset type detection (soft/hard).
0x2 AP initialization before microcode loading
0x3 North Bridge initialization before microcode loading
0x4 South Bridge initialization before microcode loading