Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 277)

Supported IPMI Commands
ATCA-7480 Installation and Use (6806800T17A) 277
8.4.20 Enable Module Site Command
The Enable Module Site command is used to enable a module site.
8.4.21 Disable Module Site Command
The Disable Module Site command is used to disable a module site. If a module site is disabled,
the IPMC firmware ignores the module inserted and acts as if the module is not present.
Table 8-48 Enable Module Site Command Description
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4 Module Site ID
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
Table 8-49 Disable Module Site Command Description
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4 Module Site ID
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00