1 ethernet transceivers, 2 ethernet switch ports, Table 6-1 – Artesyn ATCA-9305 User's Manual (May 2014) User Manual
Page 132: Ethernet switch ports, Ethernet interface
Ethernet Interface
ATCA-9305 User’s Manual (10009109-07)
132
6.2.1
Ethernet Transceivers
The BCM5461S is a 10/100/1000BASE-T GbE Ethernet transceiver using the SGMII interface.
The BCM5482 consists of two complete 10/100/1000BASE-T GbE transceivers supporting
both voice and data simultaneously.
6.2.2
Ethernet Switch Ports
The physical port numbering starts at 1, as indicated in the figure. However, the software
port numbering starts at 0. Therefore, to issue a command to a port, you must subtract 1
from the port numbers shown in the figure.
Table 6-1 Ethernet Switch Ports
Port
Interface
Connection
1
SGMII 1 GB
PHY to backplane BASE
2
SGMII 1 GB
PHY to backplane BASE
3
SGMII 1 GB
Switch PHY to front panel RJ45 connector
4
SGMII 1 GB
Management processor PHYs to front panel RJ45 connector
5
XAUI 10 GB
Stratix II GX bridge 2
6
XAUI 10 GB
Stratix II GX bridge 1
7
XAUI 10 GB
Back plane Fabric
8
XAUI 10 GB
Back plane Fabric
9
-
not used
10
-
not used
11
XAUI 10 GB
BCM56802 to J30 to optional RTM
12
13
XAUI 10 GB
Stratix II GX bridge 3
14
XAUI 10 GB
Stratix II GX bridge 4