Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 250)

Management Processor Monitor
ATCA-9305 User’s Manual (10009109-07) 250
um [.b, .w, .l] base_addr [top_addr]
9.14 Other Commands
This section describes all the remaining commands supported by the ATCA-9305 monitor.
9.14.1 autoscr
The autoscr command runs a script, starting at address addr, from memory. A valid autoscr
header must be present.
Definition
autoscr [addr]
9.14.2 base
The base command prints or sets the address offset for memory commands.
Definition
Displays the address offset for the memory commands.
base
Sets the address offset for the memory commands to off.
base off
9.14.3 bdinfo
The bdinfo command displays the Board Information Structure.
Definition
bdinfo