13 disable payload control, 14 reset ipmc, 13disable payload control 7.11.14reset ipmc – Artesyn ATCA-9305 User's Manual (May 2014) User Manual
Page 180: Table 7-29, Disable payload control command, Table 7-30, Reset ipmc command, System management
System Management
ATCA-9305 User’s Manual (10009109-07)
180
7.11.13 Disable Payload Control
The Disable Payload Control command disables payload control from the Serial Debug
interface.
7.11.14 Reset IPMC
The Reset IPMC command allows the payload to reset the IPMC over the SIPL.
Table 7-29 Disable Payload Control Command
Type
Byte
Data Field
Request Data
1:3
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Table 7-30 Reset IPMC Command
Type
Byte
Data Field
Request Data
1:3
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
4
Reset Type Code
0x00 Cold IPMC reset to the current mode
0x01 Cold IPMC reset to the Normal mode
0x02 Cold IPMC reset to the Standalone mode
0x03 Cold IPMC reset to the Manual Standalone mode
0x04 Reset the IPMC and enter Upgrade mode
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)