Avalon Firestyles GreenStart Igniter 2 for Freestanding Stoves - Manual (Page 10)

GreenStart Igniter 2 for Freestanding Stoves
Installation Instructions
(SKU 94400953)
Page 10 of 27 17601769.docx— 12/11/13 © Travis Industries, Inc.
Attaching the Compressor Assembly to the Stove, continued
9. Attach the igniter switch to the bottom of the stove using the 10-24 x ½” screws provided, as shown
below.
Olympic and Rainier models using the Ashpan Pedestal: The start button is installed onto the left
front corner.
10. Insert the 2 cable holders in the 2 holes on the underside of the stove. Route the start switch wire
under the stove, through the cable holders.
11. Push any excess start switch wiring into the compressor assembly.
NOTE: A lock-tie is included to secure excess wiring.