Avalon Firestyles GreenStart Igniter 2 for Freestanding Stoves - Manual (Page 9)

GreenStart Igniter 2 for Freestanding Stoves
Installation Instructions
(SKU 94400953)
Page 9 of 27 17601769.docx— 12/11/13 © Travis Industries, Inc.
Attaching the Compressor Assembly to the Stove, continued
6. Cut about 8” off the compressor hose and attach to the brass nipple on the igniter.
7. Connect the compressor assembly wires; orientation does not matter. Wrap the wires around the
compressor hose as shown below.
8. Attach the cover box to the heat shield as shown below, using the screws removed in step 2. If your
unit does not include these holes, drill the holes with the included bit.