Avalon Firestyles GreenStart Igniter 2 for Freestanding Stoves User Manual
Page 5
GreenStart Igniter 2 for Freestanding Stoves
Installation Instructions
(SKU 94400953)
Page 5 of 27
17601769.docx— 12/11/13
© Travis Industries, Inc.
Answer, Liberty, Olympic, Rainier Installation, continued
4. Install the igniter spacer using the screws and gasket removed in step 3. Make sure to use the screws
that were removed with the gasket.
5. Attach the igniter with gasket to the igniter sleeve using the screws and gasket included in this kit.
Note that the igniter gasket is placed between the sleeve and igniter assembly.
NOTE: These instructions show the compressor assembly attached to the back of the stove.
Alternatively, you may place it on the floor near the stove. See the Cape Cod model installation
instructions on page 12 for details.