Avery Dennison 6037 Rev. AA 3/04 Programmer Manual - Manual (Page 169)

Utility Descriptions 5-49
The /F option sets the maximum number of files to be queued up at one
time. The default number of files is ten. The minimum is two and the
maximum is 32. Support for more files is often useful when using
wildcards in filenames. This option is only allowed the first time PRINT is
run (or until the next system reboot).
The /P option causes all files listed after this option to be submitted for
printing. This is the default for filenames encountered on the PRINT
command line.
The /T option cancels all the files from the print queue (list).
The /H option displays the help screen.
Examples
PRINT FILE1.TXT FILE2.TXT FILE3.TXT
Puts three files into the print queue. The first file prints after the
command ends.
PRINT /C FILE2.TXT
Removes file FILE2.TXT from the print queue. All other files in the queue
print normally.
PRINT /T
Cancels all files in the print queue. Printing may continue for a short time
because of the buffer in your printer.