Aviosys 8800Pro - Manual (Page 16)

16
Current Correction procedure:
During the procedure , the controlled device ( like HUB or lamp ) need to connect with 8800pro
and the output on 8800Pro keep at ON status.
1. Please click to enable the advanced setting, and you will see the message remind that the
currect setting need to use the current meter instrument .
2. Please use the external meter to get the current value of the controlled device .
then type the amp value ( value format support to one digit after decimal point , like s 1.5 or
2.3 ) into the setting . After 5 second , you will see the current value change to your setting at
the Information section which mean the correction successful .
Username & Password
The default Username and password is admin /12345678 . The username and password is for
the purpose that user can control 8800Pro remotely through software " 8800Pro SDK.exe " &
SDK.
Username : user can change own username. The maximum word is 8 digits , please do not
use special sign like~!@#$%^&*() .
Password : user can change own password. The maximum word is 8 digits , please do not use
special sign like~!@#$%^&*() .