Aviosys 8800Pro - Manual (Page 7)

7
Hardware
Install
1.) Connect the power source cable to 8800Pro power input .
2.) Plug the device power you would like to control the power on off
3.) Connect 8800Pro to PC with attached USB cable.
Note : Each PC can only connect to one 8800Pro.
Software
Installation Instructions
The software for the device is located on the CD that came with the device. IP Family Pack is
located on the main page of the CD. Please follow the directions carefully and install the
necessary files
1.) First place the CD that came with your device into your CD/DVD Rom drive. The CD
should auto run but if it does not go to the CD/DVD Rom drive and select the file
“autorun.html”.