Audio routing commands, Mxxxaiioo<cr, Mxxxaaii<cr – AVocation Systems HX-0808HA/8 User Manual
Page 15: Mxxxabooyy<cr, Mxxxabayy<cr
D10
Legend:
xx
=
unit ID number 00 to 15
ii
=
input number 00 to 64
oo
=
output number 01 to 64
yy
=
value to set
Audio Routing Commands
MXxxAiioo<CR>
Route an audio input to an audio output
MX00A0103<CR>
Routes audio input 1 to output 3
Response: MXxx-Audio=ii to oo<CR>
MXxxAiio1,o2,o3,o4,o5,o6,o7,o8,o9,o10<CR>
Route an audio input to as many as 10 outputs
MX00A0101,02,03,04,05,06,07,08,09,10<CR>
Routes audio input 1 to outputs 1 to 10
MX00A0101,02,03,04<CR>
Routes audio input 1 to outputs 1 to 4
Response: MXxx-Audio=ii to oo<CR>
(for each route made)
MXxxAAii<CR>
Routes an audio input to all outputs
MX00AA02<CR>
Routes audio input 2 to all audio outputs
Response: MXxx-Audio=ii to oo<CR>
(for each route made)
MXxxABooyy<CR
Sets a balance level for an output
MX00AB0249<CR>
yy=00 for full left
yy=49 for center
yy=99 full right
Output 2 is set for equal balance between left and right
channels.
Response: MXxx-Balance oo set to yy<CR>
MXxxABAyy<CR>
Sets a balance level for all outputs
MX00ABA49<CR>
yy=00 for full left
yy=49 for center
yy=98 full right
Sets the balance of all outputs to an equal balance
between left and right channels.
Response: MXxx-Balance oo set to yy<CR>
(for each output changed)