Awind WIGA / WGA-310 User's Manual User Manual

Page 29

Advertising
background image

29

WGA-310 User Manual

→Back

< Auto-Configuration Network Setup>

The default setting of the WPS box is DHCP client. When the WPS box is connected

to a LAN that already has a DHCP server present, the WPS box takes an IP address

assigned to it by the server. When the WPS box is connected to a LAN that does

not have a DHCP server, the WPS box becomes the DHCP server in the network.

< IP Setup>

♦ You can select “obtain IP address automatically” or “Use the following IP

address”

♦ IP Address: The default value is 192.168.100.10.

♦ Subnet Mask: The default value is 255.255.255.0

♦ Default Gateway: The default value is 192.168.100.10

♦ DNS Server: The default value is 192.168.100.10

<DHCP Server Setup>

♦ You can select “auto(Enable/Disable DHCP Server)” or “Disable”)

♦ Start IP: The start IP address of DHCP Server.

♦ End IP: The end IP address of DHCP Server

♦ Subnet Mask: The default value is 255.255.255.0

♦ Default Gateway: The default value is 192.168.100.10

♦ DNS Server: The default value is 192.168.100.10

< Wireless Setup>

♦ Wireless LAN: The default value is “Enable”.

♦ Embedded AP SSID:SSID string ,max. Length is 32 bytes.

Connect to Existing AP: This is “AP client” mode feature. By this feature you

can let you WPS device to join others Access Point via wireless.

♦ First, enter the existing AP SSID and required security key in “Existing AP SSID

and “Key”, then reboot your system. After these steps, WPS will connect to this

AP by wireless automatically.

Note: The default value of AP client mode is “Disable”, also, LAN function will

be disabled during AP client mode.

♦ Region: default value is “Worldwide”.

♦ SSID Broadcast: The default value is “Enable”

♦ Channel: to set fixed channel or Auto. The “Auto” means after power on WPS,

it will scan all of wireless channel and select clear one channel automatically.

♦ Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit or 128bit

in ASCII or HEX string.

♦ Key: If Encryption is enabled, you have to set key value according to the

encryption mode you selected.

< Gatekeeper>

Gatekeeper is designed for ensuring the enterprise network security within WPS box

♦ All Block can block Guest Users(through wireless) to access all office

network(LAN),

Advertising