Baby Lock Molly (BL30A) Instruction and Reference Guide - Manual (Page 63)

58
Manual Buttonhole
Machine setting
q Stitch pattern: BH
w Stitch width: 4 – 5
e Stitch length: 0.5 – 1
r Thread tension: 1 – 5
t Presser foot: Buttonhole foot B
If the diameter of the button is more than 1" (2.5 cm), a
buttonhole must be made manually as follows:
z Replace the foot with the buttonhole foot B.
x Pull the buttonhole lever down as far as it will go.
Draw both needle and bobbin thread to the left.
Lower the needle into the fabric at the starting point,
and lower the foot.
q Needle thread
w Bobbin thread
e Starting point
c Sew the front bartack and left row to the desired
length then stop the machine.
v Click the buttonhole lever toward you.
q
w
e
q w
e
r t
z
x
c
v