BAFO BF-7510 - Manual (Page 25)

25
and must not exceed 32 characters.
The Tx Rate field shows the current transfer rate for the Wireless Network USB Dongle. To
optimize performance and range, the Tx Rate should be set to Auto, which will automatically
adjust the transfer speed for best performance and longest range.
The Channel setting specifies the channel used in wireless communication and should be set to
the same channel as the other points in the wireless network. The setting can only be adjusted in
Ad-Hoc mode.
4.1.2 Statistics
The Statistics screen (Shown in Fig 4-3) provides information about the Tx / Rx Data,
Management, rejected Packets.
Fig 4-3