BAFO BF-7510 - Manual (Page 28)

28
value but it will likely decrease overall network performance. Only minor modifications of this
value are recommended.
Fig 4-6
The RTS Threshold Value should remain at its default setting of 2,347. A preamble is a signal
used to synchronize the transmission timing between two or more systems. A series of
transmission pulses is sent before the data to indicate that “someone is about transmit data.” this
ensures that systems receive the information correctly when the data transmission starts.
The Preamble Type should be set to Short (if the network environment is “noisy”) or Long (if
the environment is “clear”) Click Submit to complete the configuration.
Power Save, you can select enabled then submit to allow your adapter to go to sleep mode
while theadapter doesn’t precede the data transmission. Or select disabled to make the adapter
nevergo to sleep mode. Click submit to save the settings.