Basler Electric BE1-50/51B-218 - Manual (Page 5)

9252000995 Rev H BE1-50/51B-218/-228 Introduction iii
REVISION HISTORY
The following information provides a historical summary of the changes made to this instruction manual
(9252000995). Revisions are listed in reverse chronological order.
Manual
Revision and Date Change
H, 01/09
 Updated
Storage statement in Section 4.
 Modified Figure 5-2, Target Operational Test Setup.
 In Section 5, modified Target Test so that TIME and INST targets
can be verified independently from each other.
 Minor text edits throughout manual.
G, 03/08  Updated front panel drawings to show new reset button.
 Updated descriptions of targets and reset button.
F, 01/07  Moved Time Characteristic Curve Figures to Appendix A.
 Added manual part number and revision to footers.
E, 12/06  Updated Figure 4-1, Outline Dimensions for Case S1.
 Updated Figure 4-2, Panel Drilling Diagram for Case S1.
 Moved Revision History to the front of manual.
D, 02/03  Changed manual to cover the BE1-50/51B-228 in addition to the
BE1-50/51B-218.
 Re-organized the specifications in Section 1.
C, 12/00  Updated drawings in Section 2 to reflect changes to the PC board.
 Also updated the rest of the manual to reflect the change in switch
call out from SW8 to SW3.
 Added new functionality to the PICKUP LED. It is now the
ACTIVE/PICKUP LED and will be green when active and red when
picked up.
B, 12/99  Changed all references to target test current to one ampere
alternating current.
A, 05/98  Added Patent number to Specifications. Changed manual format to
reflect the current style.
—, 03/96  Initial
release