Baumatic BCS461SS - Manual (Page 31)

o
The display will then show the text on the right.
After partially extracting the jug using the arrow on
the left hand side or the two notches above the jug,
press the start button to empty the steam circuit.
The display will then show Unloading”.
o
After draining is complete the display will show the
text on the left. You should then empty the water
jug.
Steam circuit cleaning cycle
The purpose of this feature is to maintain the steam production circuit
and to avoid pools of water forming.
o
Turn on the oven using the power button.
o
Press the self-cleaning button to enter the cleaning
mode. The display will show 2 options of oven or steam
circuit.
o
Use the increase and decrease buttons to scroll
between the 2 options and highlight the steam
circuit option.
o
When the steam circuit option is highlighted press the
start button to select it. The display may then show the
text on the left which indicates that you need to insert
the filled water jug into the oven.
o
Once you have done this, press the start button
again to being the cleaning cycle. The cleaning
cycle lasts approximately 5 minutes.
31