Baumatic BRCF1855SL - Manual (Page 22)

o
When the connection is completed, no stray strands or cut wire
should be present. The cord clamp must be secured over the
outer sheath.
Reversing the door swing
o
You can choose whether you want the doors of your appliance to
open from the left or the right according to your kitchen design
or personal preference.
o
It is important that this procedure is carried out before the
fridge-freezer is positioned in the desired location. The
appliance should not be connected to the mains supply.
o
The door reversal process should only be carried out a suitably
qualified person. It is recommended that 2 people handle the
fridge-freezer during assembly. All parts that are removed
should be saved for reinstallation.
o
The fridge-freezer should be rested on something solid so that it
will not slip during the door reversal process. Do not lay the
fridge-freezer flat as this may damage the coolant system.
o
The tools which are required to carry out the door reversal
process are a Philips style screwdriver, a flat bladed screwdriver
and a hexagonal spanner.
NOTE: The door handles are supplied with the appliance and can be
installed using a Philips screwdriver. There are cap covers to cover the
screws, and the holes (on the opposite side of the door). When
reversing the door swing, the handles can be swapped to the other
side of the door with ease.
22