Baumatic BRCF1855SL - Manual (Page 27)

o
If you are placing another cooling appliance next door to this
product, then there must be a gap of at least 2 cm between the
appliances. This will help to prevent condensation from forming.
o
Be sure to leave enough space for the opening of the door, to
avoid damage to the appliance or personal injury.
Troubleshooting
IMPORTANT: If your fridge freezer appears not to be
operating properly, before contacting the Baumatic
Customer Care Department, please refer to the checklist
below.
My fridge freezer does not appear to be working/there is
no power to my appliance.
o
Check that the plug is fully inserted into the power socket.
o
Check that there is power to your mains supply (e.g. that there
hasn’t been a power cut or that the fuse hasn’t blown).
o
Check that the control panel has not been turned to the off
setting.
o
Check that your mains supply voltage, corresponds to the
voltage stated on the rating plate of your appliance.
My fridge freezer appears to be performing poorly.
o
Check that the appliance isn’t overloaded and that food hasn’t
been packed too tightly into it.
o
The thermostat setting is too low; you should turn the
thermostat dial to a higher number.
o
Ensure that the doors are closing properly and that the doors
have not been opened for a prolonged period in error.
o
Ensure that there is adequate ventilation for your appliance.
My fridge freezer is noisy.
o
The refrigerant gas that circulates the pipework of the appliance
may make a slight noise, even if the compressor is not running.
27