Baumatic BRCF1855SL - Manual (Page 26)

Positioning
o
It is advisable that your appliance is only installed in a location
where the ambient temperature of the room, corresponds with the
climate classification that is stated on the rating plate of your
appliance. Your appliance may not function correctly if the ambient
temperature falls outside of the following ranges.
Climate classification Appropriate ambient temperature
SN +10 to +32 degrees centigrade
N +16 to +32 degrees centigrade
ST +18 to +38 degrees centigrade
T +18 to +43 degrees centigrade
o
Positioning the appliance requires two people in order to avoid
injuries or damage to the appliance.
o
Keep a minimum of 90 mm between your refrigerator and the back
wall. There should also be a gap of 20 mm either side. If there is
insufficient space this can create the sound of vibration, weakening
of the refrigerator’s power and a waste of electricity.
o
The appliance should never be placed upside down or carried in a
horizontal position.
o
Your appliance should not be located in direct sunlight or exposed
to continuous heat or extremes of temperature (e.g. next to a
radiator or boiler). If this is not possible, then you should install an
insulation plate between the appliance and the adjacent heat
source.
o
You should check whether there is an electrical socket available,
which will be accessible after your appliance is installed.
o
Place the appliance flatly and firmly on a solid base. The appliance
is fitted with adjustable feet on the front side, which can be used to
level the appliance.
o
If the front of the appliance is positioned slightly higher than the
rear, the door can be opened and closed more easily.
o
If your refrigerator tilts down to the left, turn
the left adjusting leg until the appliance is
level.
o
If your refrigerator tilts down to the right, turn
the right adjusting leg until the appliance is
level.
26