BECKHOFF CX50x0 - Manual (Page 57)

Notes on the documentation
CX50x0 - Hardware Documentation 55
Onboard Device
This menu is used for configuring the audio, multimedia and LAN interfaces.
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Device
Intel HD Audio Controller [Disabled] Item Help
USB Client Routing [Disabled]
SDIO/MMC Controller [Disabled]
Onboard Lan Controller Enabled
Console Redirect [Disabled]
x Serial Port Mode 115200,8,n,1
x After Boot Enabled
x Flow Control Signals Ignore
↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Intel HD Audio Controller
Option for activating the internal audio controller. The function is disabled since currently no associated extension is
implemented.
USB Client Routing
Option for configuring the second USB port with USB client functionality.
SDIO/MMC Controller
Option for activating/deactivating the SDIO / MMC controller. In general the CX50x0 units are not equipped with the
required hardware. The function is therefore disabled.
Onboard Lan Controller
The two Gigabit LAN ports are always enabled.
Console Redirect
Option for redirecting the boot process output to the serial interface. If the function is enabled the communication
parameters in the locked menus can be set.
Serial Port Mode
Option for setting the baud rate, number of bits, parity and stop bit.
After Boot
The console can remain active after the boot process. This function is only supported by a small number of operating
systems.
Flow Control Signals
Option for activating or deactivating hardware flow control.