BECKHOFF FC9001-0010 - Manual (Page 15)

Installation
3.3 Driver installation using the Add New Hardware Wizard
First install Software
Note
Install the Beckhoff TwinCAT automation software before installing the Beckhoff
Ethernet card.
Installation under Windows 2000 and Windows XP
Note
All screen shots of this documentation are made under Windows 2000.
Under Windows XP, the TwinCAT driver is installed in the same way.
After installation of the Beckhoff Ethernet card, Windows 2000, for example, comes up with the following
message during start-up:
Follow the instructions of the Add Hardware Wizard.
FC90xx 13