Belshaw Adamatic Snack Master Snack Food Frying System - Manual (Page 7)

Belshaw Bros., Inc. www.belshaw.com
• Phone 206-322-5474 • Fax 206-322-5425
Snack Master OM MN-xxxxEN 1
1 Operation
Read each step completely before doing what it
tells you to do.
1. If necessary, place lower conveyor in
kettle. Ensure that the conveyor drive is
placed in the conveyor drive sprocket.
Place the upper conveyor on top of lower
conveyor. Make sure that the upper
conveyor drive sprocket ride on the lower
conveyor drive chain.
Put cover and infeed chute in place
WARNING
Do not operate fryer without cover on
place. Doing so may expose operator to
steam and pinch points
2. Plug in the fryer power cord or turn on
main supply breaker.
3. Insure that the Emergency Stop is not
activated by pull out.
4. Check that the control power switch on
the back of the fryer heater head is on.
5. Press the green SYSTEM button on the
control box to ready fryer.