Belshaw Adamatic Snack Master Snack Food Frying System - Manual (Page 9)

Belshaw Bros., Inc. www.belshaw.com
• Phone 206-322-5474 • Fax 206-322-5425
Snack Master OM MN-xxxxEN 3
the control box .
10. . Turn on the conveyor drive using the
selector switch on the control box.
Note: If the conveyor becomes jammed, a
warning buzzer will sound about a minute
later and stop when the conveyor is turned
off. The conveyor drive is impedance-
protected so it will not burn out due to
jamming.
WARNING
If the conveyor becomes jammed:
1. Turn off the conveyor drive and the
heater.
2. Allow the system to cool down.
HOT SHORTENING IS DANGEROUS.
3. Determine the cause of the jamming.
4. Clear it.
5. Restart the system.
11. Continue adding shortening to the kettle to
maintain the proper shortening level (see
step 2). There are two ways to do this:
• Melt some shortening in a pan on the
stove and carefully pour it into the kettle.
• If you are using the optional EZ Melt,
transfer more shortening from it. See
your EZ Melt manual.
12. To cook product, drop on infeed chute.
Beware of steam exiting out from under the
hood. Place a food bin at the at feed to catch
product as it comes out the outfeed conveyor.