Bematech KB-1800 - Manual (Page 13)

13
U
S
e
R
’S
MANU
A
l KB
-1800
·
R
evision 1.3
Figure 12
Figure 13
Figure 14
ATENTION!
In case your print is kept off for a period longer than 30 days, is recomended to
keep the paper in the mechanism.
With this, the mechanism will be always in perfect conditions of use.
Removing Jammed Paper
If a paper jam occurs, follow the steps below:
1. Cut the paper at the paper entrance.
2. Unlock the presenter mechanism using the presenter lock.
3.Unlock the head up switch raising the print head.
4. Gently pull the paper out of the mechanism.
5. lock the head up switch back to initial position.
6. lock the presenter.
Key Panel
The key panel gives visual printer status and manual control to the operator.
These functions are accomplished using one switch and leDs, described below:
• POWeR leD: This green led will be on whenever power is applied to the printer and the power switch is on.
• PAPeR leD: This red led will be on when the printer is without paper. If the print head is up, this red leD will
blink.
• eRROR leD: This red led will also be lit in error conditions.
• PAPeR FeeD BUTTON: Use to feed paper line by line with fast button touches or feed paper continuously, by
pressing and holding down the button.