Bematech KC-4112 Rev.1.1 - Manual (Page 11)

KC-4112 . Revision 1.1
11
Paper handling
Loading Paper
To insert a new paper roll, please do as follows:
The end of the paper roll must be
cut evenly, as shown on the right.
Be sure that the presenter is in
the locked position.
Place the spindle in the paper
roll’s core and then place the roll
and spindle in the paper holder
as shown.
Note that the paper must go under
the damping device.
Gently push the paper into the
paper entrance. The printer will
automatically pull the paper, and
turn off the Paper LED.
Figure 6
Figure 7
Figure 8