Bematech KC-4112 Rev.1.1 - Manual (Page 2)

User’s Manual
2
KC-4112 User´s Manual
Code: 6120 R1.1
August 2005
(First edition: May 2002)
Copyright  2005 by Bematech S.A. Curitiba, Brazil.
All rights reserved.
No part of this publication may be copied, reproduced, adapted or translated without the prior written
permission of Bematech S.A., except when allowed by patent rights.
Information in this publication is purely informative, subjected to change without notice and no liability is
assumed with respect to the use of this. However, as product improvements become available, Bematech S.A.
will make every effort to provide updated information for the products described in this publication. The latest
version of this manual can be obtained through Bematech website:
www.bematech.com
Notwithstanding the other exceptions contained in this Manual, the consequences and responsibility are
assumed by the Purchaser of this product or third parties as a result of: (a) intentional use for any improper,
unintended or unauthorized applications of this product, including any particular purpose; (b) unauthorized
modifications, repairs, or alterations to this product; (c) use of the product without complying with Bematech
S.A. Corporation’s operating and maintenance instructions; (d) use of the product as component in systems or
other applications in which the failure of this could create a situation where personal injury or material
damages may occur. In the events described above, Bematech S.A. and its officers, administrators, employees,
subsidiaries, affiliates and dealers shall not be held responsible or respond by any claim, costs, damages,
losses, expenses and any other direct or indirect injury, as well as claims which alleges that Bematech S.A.
was negligent regarding the design or manufacture of the product.
Bematech S.A. shall not be liable against any damages or problems arising from the use of any options or any
consumable products other than those designated as original Bematech products or approved products by
Bematech S.A.
Any product names or its logotypes mentioned in this publication may be trademarks of its respective owners
and shall be here recognized.
Product warranties are only the ones expressly mentioned in the User’s Manual. Bematech S.A. disclaims any
and all implied warranties for the product, including but not limited to implied warranties of merchantability
or fitness for a particular purpose. In addition, Bematech S.A. shall not be responsible or liable for any special,
incidental or consequential damages or lost profits or savings arising from the use of the product by the
Purchaser, the User or third parties.
FCC CLASS A
DECLARATION OF CONFORMITY
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, use and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to the radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.