Bematech KC-4112 Rev.1.1 - Manual (Page 27)

KC-4112 . Revision 1.1
27
Command Hexadecimal
Decimal
GS k 5 d
1
…d
n
NUL 1D 6B 05 d
1
…d
n
00
29 107 5 d
1
…d
n
0
GS k 70 n d1...dn 1D 6B 46 n d
1
…d
n
29 107 70 n d
1
…d
n
GS k 6 d
1
…d
n
NUL 1D 6B 06 d
1
…d
n
00
29 107 6 d
1
…d
n
0
GS k 71 n d
1
…d
n
1D 6B 47 n d
1
…d
n
29 107 71 n d
1
…d
n
GS k 72 n d
1
…d
n
1D 6B 48 n d
1
…d
n
29 107 72 n d
1
…d
n
GS k 73 n d
1
…d
n
1D 6B 49 n d
1
…d
n
29 107 73 n d
1
…d
n
GS k 128 n
1
n
2
n
3
n
4
1D 6B 80 n
1
n
2
n
5
n
6
d
1
…d
n
n
3
n
4
n
5
n
6
d1…d
n
29 107 128 n
1
n
2
n
3
n
4
n
5
n
6
d
1
…d
n
Description
Prints an ITF barcode where n indicates the number of
bytes that will be sent and d
1
…d
n
is the sequence of n
bytes containing the barcode information with
4 8
≤ d ≤ 57. Number of digits in the barcode limited
by the print field as well as the configured barcode width.
Prints a CODABAR barcode where n indicates the number
of bytes that will be sent and d
1
…d
n
is the sequence of n
bytes containing the barcode information. The bytes that
can be used in d are 36, 43, 45 to 57 and 65 to 68
(upper case letters) or 97 to 100 (lower case letters).
Lower case and upper case letters can’t be combined in
the same barcode.A check sum digit will be added
automatically. Number of digits in the barcode limited by
the print field as well as the configured barcode width. If
the first character is a letter, the last character must also
be a letter. Excluding these two characters (the first and
the last one), any other character can be a letter.
Prints a CODE 93 barcode where n indicates the number
of bytes that will be sent and d
1
…d
n
is the sequence of
n bytes containing the barcode information. This code
can use all bytes from 0 to 127. A check sum digit will
be added automatically. Number of digits in the barcode
limited by the print field as well as the configured
barcode width.
Prints a CODE 128 barcode where n indicates the number
of bytes that will be sent and d
1
…d
n
is the sequence of
n bytes containing the barcode information. This code
can use all bytes from 0 to 127. The subset is
automatically chosen by the printer based on the data
received. A check sum digit will be added automatically.
Number of digits in the barcode limited by the print field
as well as the configured barcode width.
Prints a PDF-417 barcode where:
n
1
is the ECC level (from 0 to 8).
n
2
is the pitch height (from 1 to 8) where height=n
2
x
0.125mm.
n
3
is the pitch width (from 1 to 4) where width=n
3
x
0.125mm.
n
4
is the number of codewords per row – if n
4
is 0, the
maximum number of columns allowed for the pitch width
informed will be used. If the barcode can’t fit the print
width the printer automatically adjusts it for the maximum
permitted width within the line field.
n
5
and n
6
indicate the number of bytes that will be
coded, where total=n
5
+ n
6
x 256.
d
1
…d
n
is the actual sequence of bytes that will be coded.