Bematech KC-4112 Rev.1.1 - Manual (Page 6)

User’s Manual
6
Characteristics Specifications
Printing
Method: Thermal Line Printing
Dot Density: 8 dots/mm (203 dpi x 203 dpi)
Print Width: 104 mm (4.1”) (832 dot-positions)
Print Speed: 80 mm/s (3.15”/s) (fastest, printing ASCII)
Characters per line: 34, 46, 69 and 92
Character Set: Alphanumeric CP850, CP860 and CP437
Features
Modular design.
Automatic cutter (full and partial cut).
Presenter with retractable function: 450 mm/s (17.7”/s).
High reliability.
Low paper sensor (paper near end).
Automatic paper loading.
Bar code type: UPC-A, UPC-E, EAN13, EAN8, CODE 39, ITF, CODABAR,
CODE 93, CODE 128, ISBN, MSI, PLESSEY, PDF-417.
Communication Buffer Capacity: 3 Kbytes
Interface: Parallel (Unidirectional), Serial(RS-232) and
USB (optional)
Serial interface specification:
• Baud rate: configurable 9600 or 19200
• Start bit: 1 bit
• Data bits: configurable 7 or 8 bits
• Parity bit: odd / even or no parity
• Stop bit: one bit or more
Power requirements
Voltage: 24 Vdc ± 10%
Current: 2 A nominal
Operating temperature: 5 to +40ºC (+41 to +104°F)
Environment
Storage temperature: -20 to +60ºC (-4 to +140°F) (except for paper)
Operating humidity: 35 to 80% RH, non condensing
Storage humidity: 10 to 90% RH, non condensing (except for paper)
Reliability
Print head service life: 100 Km, hundred million pulses
Cutter lifetime: 500,000 cuts
Chapter 2
TTTTTechnical Specifications K echnical Specifications K echnical Specifications K echnical Specifications K echnical Specifications KC CC CC-4112 -4112 -4112 -4112 -4112