BrightSign HD2000 Network Manager Guide - Manual (Page 8)

4 Chapter 2
•
•
•
•
•
•
3 Upload files to your library:
a Click Upload New Files.
b Do either of the following:
• To add files from your local computer
drives, click Upload content from your
local drive, select the files you want to
add, and then click Open.
The upload
status appears next to each filename while
the files are uploading, and a check
appears next to each filename when the
upload is done.
• To access files from a server, click Use
content from a remote server, enter the server’s address followed by the filename, and
then click Add. For example, if your file is called video23.mpg and it is stored in the files
folder on the roku.com server, you need to enter http://roku.com/files/video23.mpg.
When the file is done uploading, click OK.
c Click Finished.
d Repeat steps 3a – 3c to add other files to your library.
4 Add files from your library to your presentation:
a Under Files, check the boxes next to the files you want to include in this presentation.
TIP: To quickly check or uncheck all your files, click the box next to the Name column heading.