3 mounting, Mounting – Bronkhorst BRIGHT (V2.00 and higher) User Manual
Page 7
Advertising
3 | MOUNTING
3 Mounting
!
Take attention to tighten, don’t over tight.
!
The BRIGHT comes with 4 different bolts. Please check the instruction above which bolt should be used.
The design makes it possible to place the BRIGHT in other positions as shown above. The clip and the BRIGHT
can be turned in angles of 90°. The BRIGHT can also be placed on the backside of the T-part.
The external mounting-part can also be used for mounting the BRIGHT on a wall.
Dimensional drawings are available at the download section of our website:
9.17.048
Page 7
Advertising