Bronkhorst BRIGHT (V2.00 and higher) - Manual (Page 9)

5 | USER INTERFACE
5 User Interface
5.1 Buttons
The buttons have the following functions:
- Enter selected menu
- Enter edit mode
- Confirm selection/changes
- Menu selection up
- Select information field
- Next character in edit mode
- Up in table
- Menu selection down
- Select information field
- Previous character in edit mode
- Down in table
- Return to previous screen
- Undo and Exit edit mode
- Change information in right user-field
Display
Measure readout
Custom readout 1
Custom readout 2
Top line
Buttons
Button
Button
Button
Button
5.2 Power-up
When power-up, the BRIGHT shows consecutive:
Firmware version
Bronkhorst High-Tech logo
Readout screen.
5.3 Display
The display is divided into 4 areas, ‘measure readout’,
‘custom readout 1’, ‘custom readout2’ and the top line.
The information in these areas can be configured by the
user.
If an area contains a parameter which can be set or reset
by the operator, you can press or to select this
parameter. Press
to enter the edit mode or press
to return to ‘measure readout’.
If ‘custom readout1’ is disabled. You can
only switch between ‘measure’ and ‘custom
readout 2’
SET
CANCEL
A
B
C
D
1 SET
2
3
4 CANCEL
1
2
3
SET
CANCEL
!
9.17.048 Page 9