BUG-O Systems CWE-5 - Manual (Page 2)

2
SAFETY
PROTECT YOURSELF AND OTHERS FROM SERIOUS INJURY OR DEATH. KEEP
CHILDREN AWAY. BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE
AND REPAIR PROCEDURES ARE PERFORMED ONLY BY QUALIFIED INDIVIDUALS.
EQUIPMENT DAMAGE
POSSIBLE.
ELECTRIC SHOCK can kill.
1) The equipment is not waterproof.
Using the unit in a wet environment
may result in serious injury. Do not
touch equipment when wet or standing
in a wet location.
2) The unused connectors have
power on them. Always keep the un-
used connectors covered with the
supplied protective panels. Operation
of the machine without the protective
panels may result in injury.
3) Never open the equipment without
first unplugging the power cord or
serious injury may result.
4) Verify the customer-supplied power
connections are made in accordance
with all applicable local and national
electrical safety codes. If none exist,
use International Electric Code (IEC)
950.
5) Never remove or bypass the equip-
ment power cord ground. Verify the
equipment is grounded in accordance
with all applicable local and national
electrical safety codes. If none exist,
use International Electric
Code (IEC) 950.
READ INSTRUCTIONS.
Read the instruction manual before
installing and using the equipment.
1) Do not plug in the power cord with
out first verifying the equipment is OFF
and the cord input voltage is the same
as required by the machine or serious
damage may result.
2) Always verify both the pinion and
wheels are fully engaged before
applying power or equipment damage
may occur.
3) Do not leave the equipment
unattended.
4) Remove from the work site and store in
a safe location when not in use.
1) Never try to stop the pinion from
moving except by removing power or
by using the STOP control.
2) Do not remove any protective panels,
covers or guards and operate
equipment.
MOVING PARTS can
cause serious injury.
FALLING EQUIPMENT
can cause serious
personal injury and
equipment damage.
Faulty or careless user installation is
possible. As a result, never stand or
walk underneath equipment.