BUG-O Systems BUG-6550 - Manual (Page 24)

24
BENT RIGID RAIL (BRR) is a rigid section of high quality alloy bent for circumferential applications. A
machined gear rack is mounted on the rail, with which the pinion of the drive unit meshes, providing positive
drive in all directions. The wheels of the carriage travel in opposed grooves at either side of the rail, securing
the carriage to the rail.
The rail can be ordered as a complete ring (BRR-1210-__) or
as individual sections (BRR-1180). When ordering, specify
the work diameter (inside or outside), method of mounting
and if a complete ring is required. On larger diameters,
rail can be “leapfrogged” around the vessel to reduce the
quantity needed. Maximum section length is 80" (2 m).
Note: Adjustable magnet support legs (ARM-2480),
shown above, are sold separately.
PARTS LIST
PART NO. QTY DESCRIPTION
ARR-1002 1 Rack
ARR-1027 2 Splicer Bar
ARR-1028 2 Carriage Bolt
ARR-1044-E 1 Rail Extrusion
FAS-0375 2 Screw, Hex Hd Cap 5/16-18
FAS-1370 2 Hex Nut 5/16-18
B
C
D
A 2.75" (70 mm)
B 4.0" (102 mm)
C 0.375" (9.5 mm)
D 0.875" (22 mm)
A
BRR CROSS SECTION VIEW
BRR-1180 BENT RIGID RAIL / CROSS SECTION / APPLICATION VIEW / PARTS LIST