Instructions for the user, 2 hobs with touch-control buttons – Campomatic Hobs Vetro V Series User Manual

Page 11

Advertising
background image

11

Instructions for the user

7.2 Hobs with touch-control buttons

When an icon is pressed the unit beeps to confirm.

To operate the panel of the hobs equipped with touch-controls, lightly press the icons printed on its
surface.

On first connection to the electrical mains, an operating check will be carried out automatically
and all the indicator lights will come on for a few seconds.

7.2.1 Switching on the hob

When not in use, all hob components will be switched off. Hold down switch key for 2 seconds to
switch the hob on; a led will turn on above the symbol to confirm that the hob is lit. If no functions are
used within
10 seconds of switching the hob on, it will automatically turn itself off.

7.2.2 Single cooking zones

The associated cooking z o n e is indicated close to e a c h control zone. For e x a m p l e, t h e r e i s a
symbol identifies the knob that controls the rear right-hand cooking zone.
After turning on the hob as described in paragraph “7.2.1 Turning on the Hob”, press the keys “+” and”
-“ to activate the cooking zone (display indicating 0) and adjust the power at which it should operate. The
power settings range from a minimum of 1 to a maximum of 9.
You must adjust the power within 10 seconds from when the cooking zone is activated, otherwise it

will automatically deactivate.

Press the “+” and “-” buttons in the following way to activate the cooking zone and adjust its power:

1. press the symbol “+” (0 appears on the display: this means that the cooking zone is activated);
2. by continuing to press the symbol “+”, you can adjust the power of the cooking zone up to

the maximum value of 9;

3. if you instead press the symbol “-”, you adjust the power of the cooking zone down

to the minimum value of 1.

7.2.3 Dual cooking zones

To activate heating of the dual cooking zone, once power 9 is reached by following the
instructions provided in paragraph “7.2.2 Single cooking zones”, press the “+” again. Now the
maximum power of the cooking zone is activated, and is shown by the LED light turning on next to
the number indicating the operating power. Press on the symbols “+” and “-” to adjust the power of
the dual cooking zone to the desired value.

7.2.6 Cooking zone lock-out

The cooking zone lock-out function is a user safety functions. It locks out the hob controls to prevent
the ceramic cooking zones being switched on accidentally.

Hold down lock key for 1 second to lock out the hob. The hob can be reactivated by holding down lock
key again for 1 second.

7.2.7 Cooking zone layout

REAR LEFT

REAR RIGHT

REAR

CENTRAL


RRONT LEFT

FRONT GIGHT

FRONT

CENTRAL








Advertising