Campomatic Hobs Vetro V Series - Manual (Page 16)

16
Instructions for the installer
If the appliance you have purchased is not fitted with a mains power lead a power
lead resistant to a temperature of at least 90°C must be used.
Otherwise, the electrical safety of the appliance may be put at risk.
The manufacturer declines all responsibility for damage to persons or things caused by
non- observance of the above prescriptions or by interference with any part of the appliance.
Warning: close the cable clamp after making the
electrical connection. Close the terminal board cover by
twisting it down.
TERMINAL BOARD
Components with product:
NO Name Qty Unit
1 Electric hob 1 table
2 Installation and using manual 1 book
3
10.4 POSITIONING OF THE HOB