Campomatic Hobs Vetro V Series - Manual (Page 14)

14
Instructions for the user
8. CLEANING AND MAINTENANCE
Before any intervention, disconnect the power supply of the device.
8.1 C l e a n i n g the ceramic hob
The hob should be regularly cleaned; preferably after every use, once the residual heat warning lights
have gone off.
Smudges from aluminum-bottom pans can be easily cleaned off with a cloth
dampened in vinegar.
Remove any burnt residues after cooking with the scraper; rinse with water and wipe
dry with a clean cloth. Regular use of the scraper considerably reduces the
need for chemical detergents for the daily cleaning of the hob.
Never use abrasive or corrosive detergents (e.g. cleaning powders, oven sprays,
spot-removers, wire sponges).
NEVER USE A STEAM JET TO CLEAN THE APPLIANCE.
9. SOMETHING WRONG?
PROBLEM POSSIBLE CAUSES WHAT TO DO?
The hob doesn’t work - The hob is not wired in or - Switch on at the wall
switche on at the wall.
- There is a power failure - Check power supply
The results of cooking are Temperature is too high or - Consult cooking tips
unsatisfactory
too low
- Wrong shelf position
- Wrong type of dish
- Cooking time is incorrect
The hob smokes - The hob is dirty
- Food has spilled over
- Clean the hob once cooking
is finished. Let it cool first.
- Use a larger pan
The cooking zones do not come - Timed cooking programming - Check the instructions for
on during timed cooking error timer