Campomatic KOC45BI - Manual (Page 10)

9
PT2, cooking starts immediately. Press PT1 again to reset cooking time
。
8.7 Defrost by Weight
⑴. After selecting the function “
”, “ ” “ ” indicators are on, press PT1 to do the program selection, after
selecting the program, press PT1 to adjust the weight, after adjust the weight; press PT1 to adjust the duration, time
show district blinks and ‘AUTO’ displays; after setting the duration, press PT2 to start cooking.
Press PT1 again to reset programm
。
⑵. The appliance will pause after working half of time preset. “
” stops blinking, DSP1 shows the rest defrost
time. DSP2 shows ‘Turn’ blinking, it is off when open the door of the appliance. It continues to work when pressing
PT2 again.
We can calculate the defrosting time according to different food and weight, and microwave power can adjust
automatically to reach the best defrosting effect. Furthermore, the table beneath offers reference value of defrosting
referring to the weight, which includes weight level, defrosting time and follow-up time.
PROGRAM FOOD WEIGHT（GRAM） TIME（MIN）
DURATION TIME
（MIN）
PR 01 MEAT 100-2000 2:20-43:30 20-30
PR 02 BIRD SPECIES 100-2500 2:10-58:10 20-30
PR 03 FISH 100-2000 2:00-40:00 20-30
PR 04 FRUIT 100-500 2:36-13:00 10-20
PR 05 BREAD 100-800 2:25-19:20 10-20
8.8 Defrost by time
⑴ After selecting Defrost function “ ”, “ ” “ ” indicators light up, press PT1 to adjust the cooking time;
press PT1 again to adjust the duration; after the setting above, press PT2, cooking starts immediately.
Press PT1 again to reset cooking time
。
⑵ The appliance will pause after working half of time preset, and it stops blinking, defrost function “ ”, DSP1
shows the rest defrost time. DSP2 shows ‘Turn’ blinking, it is off when open the door of the appliance. It continues to
work when pressing PT2 again.
8.9 Delayed Start time (Automatic cooking)
⑴. When PT1 is pressed to define a delayed start time the corresponding light “ ” starts to blink. DSP1 shows
the current time and DSP2 shows ‘AUTO’. Turn PT1 to the right or left to change the delayed start time. Press PT2 to
validate the delayed start time.
DSP1 shows the delayed start time you set and DSP2 is with no display when the appliance is in standby.
⑵. Press PT2 for 3 seconds if you want to cancel the selected function.
8.10 Pause in the process of cooking
⑴. You can stop the cooking process at any time by pressing PT2 or by opening the oven door. In both cases:
●
Microwave emission is stopped immediately
●
The grill is de-activated but is still very hot. Danger of burning!
●
The timer stops and the display shows the remaining amount of operating time
If you wish, at this time you can:
●
Turn or stir the food to ensure it will be evenly cooked.
●
Modify the process parameters
●
Cancel the process by pressing PT2 for 3 seconds.
To start the process, close the door and press PT2
（2）Modifying parameters
The operating parameters (time, weight, power, etc.) can only be modified when the cooking process has been
interrupted. Proceed as follows:
●
Turn PT2 to the right or left to change the function.