11 end of a cooking cycle, 12 8.12 show and child lock function, 1 show function – Campomatic KOC45BI User Manual

Page 11: 2 child lock function, 3 two ways to unlock, 13 cooling fan system, 14 inside light, The appliance light comes on, When the oven door is opened in standby status, Recommended baking menu

Advertising
background image

10

Press PT1 to activate the parameter modification mode. “

” indicator starts to blink. Turn PT1 to the

right or left to change the remaining cooking duration

Press PT1 to validate and the next parameter light starts to blink. Proceed as described in the active
function chapter to modify the remaining parameters.

Press PT2 to continue the cooking process.

8.11 End of a cooking cycle

At the end of the process you will hear three beeps and the display will show the word ‘End’.
The beeps repeat every 30 seconds until the door is opened or PT2is pressed. The oven returns to the OFF

setting.

8.12 8.12 show and child lock function
8.12.1 show function

Under Off mode, the appliance will only show clock symbol“

”. Press PT1 until DSP1and DPS2 shows OFF

SHO, which means show function is not activated. Turn PT1 to activate ON SHO, press PT2 to confirm the activation
of ON SHO.

Under ON SHO mode, heating elements will not work, only lamp, cooling fan and motor are working. If you want

the appliance to work, set the appliance as OFF SHO.

Under ON SHO mode, the appliance will alternates between ON SHO and the function you set every 5 seconds.
Note: Show function has a memory function. After Power is on, child lock function will continue to work.

8.12.2 Child lock function

Under Off mode, the appliance will only show clock symbol“

”. Press PT1 until DSP1 and DSP2 shows OFF

SHO. Press PT1 again until DSP1 and DSP2 show OFF BLOC.

Turn PT1 to activate child lock function ON BOLOC or to close child lock function OFF BLOC. When DSP1 and

DSP2 show ON BLOC, press PT2 to confirm to activate child lock. And the symbol“

” will appear on DSP4.

Under child lock function, the appliance will display “bloc “for three seconds whether you press PT1 or PT2, and

return to the previous function you set.

Note: Child lock function has a memory function. After power is on, child lock function will continue to work.

8.12.3 Two ways to unlock

Temporary unlock: Press PT1 until “

”symbol on DSP4 disappear. And you could operate the oven. After 2

minutes, the appliance will be under child lock mode.

After the two minutes, the appliance will automatically go into child lock mode whether the appliance was under

standby or working mode.

Permanent unlock: Under child lock mode, operate the appliance according to this chapter to unlock the oven.


8.13 Cooling fan system

The appliance is equipped with a cooling system which comes into operation as soon as a cooking function

starts.

Operation of the fans generates a normal air flow which comes out above the door and may continue for a short

time even after the appliance is switched off.

8.14 Inside light
The appliance light comes on:

When the oven door is opened in standby status

If the oven door is left open, the oven light will automatically shut-off after 10 minutes.

9. RECOMMENDED BAKING MENU

9.1 Cooking with Microwave
Warning! Read the section ‘Safety Precautions’ before cooking with your microwave.
Follow these recommendations when cooking with microwave:

Before heating or cooking foods with peel or skin (e.g. apples, tomatoes, potatoes, sausages) peel them
so that they do not burst. Cut the food up before starting to prepare it.

Before using a container or dish make sure that it is suitable for microwave use (see the section on types
of ovenware)

When cooking food with very little moisture (e.g. defrosting bread, making popcorn, etc.) evaporation is

Advertising