Campomatic WM950XE - Manual (Page 18)

Installation
Unpacking the washing machine
Unpack your washing machine and check if there is any damage during the transportation Also make
sure that all the items in the attached bag are received if there is any damage to the washing machine
during the transportation. Or any item is missing .Please contact the local dealer immediately.
Dispose the packing materials
The packing materials of this machine may be dangerous to kids.Please dispose them properly and avoid
easy touch by kids. Please dispose the related packing materials according to the relevant local
regulations.Please do not throw the packing materials according away together with the other daily living
rubbishes.
Remove transport bolts
Before using this washing machine,transport bolts must be
removed from the backside of this machine .Please take the
following steps to remove the bolts:
1.Loosen all bolts with spanner and then remove them
2.Stop the holes with transport hole plugs
3.Keep the transport bolts properly for future use
Positioning
Connect the inlet hose
Connect the inlet hose as indicated in the figure
Please install the washing mashing on solid and flat ground.
Please do not place the washing machine on the cardboard, wood or similar materials
Please do not install the washing machine outdoors to prevent the washing machine
from frozen to damages in machine parts.
1 2
Take out the attached inlet hose.
Approach vertically one end of the inlet
hose to the spiral tap specially for the
washing machine.
Inlet Hose Installation
18