Caple CR9215 - Manual (Page 20)

20
Fig. 3.7
Fig. 3.8
Fig. 3.9
Fig. 3.10
b) grill burner
– Remove the burner by unscrewing the
front screw (fig. 3.9).
Gently suspend the burner as shown
in figure 3.10. Be careful not to dam-
age the wire of the electric ignition
and the probe of the safety valve.
– Using a 7 mm box spanner, replace
the injector (indicated by the arrow in
fig. 3.10) by the proper one accord-
ing to the kind of gas.
– Replace the burner repeating the
above steps in reverse order.
LEFT OVEN
Oven burner and grill burner
replacement of injectors
a) oven burner
– Lift and remove the lower panel inside
the oven.
– Remove the burner securing screw
(fig. 3.7).
– Withdraw the burner as shown in fig-
ure 3.8 and rest it inside the oven.
Take care not to damage the wire to
the ignition electrode and the safety
valve probe.
– Using a 7 mm box spanner, unscrew
the injector (indicated by the arrow in
fig. 3.8) and replace it by the proper
one according to the kind of gas.
Then replace the burner repeating the
above steps in reverse order.